Desa Motion Sensing Halogen Fixture 5525 Bedienungsanleitung PDF herunterladen

1 Halogen

Lamp

Sensor

Light Control

Requirements

• The Light Control requires 120-volts AC.

• If you want to use Manual Mode, the control must be

wired through a switch.

• Some codes require installation by a qualiﬁ ed

electrician.

• This product is intended for use with the enclosed

gasket and with a junction box marked for use in wet

locations.

Features

• Turns on lighting when motion is detected.

• Automatically turns lighting off.

• Photocell keeps the lighting off during daylight hours.

• LED indicates motion was sensed (day or night).

Motion Sensing

Halogen Fixture

Model 5525

3 Wire

Connectors

6 Screws

(3 sizes included)

Gasket

Mounting Bolt

Mounting Strap

OPERATION

* resets to Auto Mode at dawn.

MANUAL MODE

ON-TIME

10 5 1 TEST

ON-TIME

TEST

AUTO

Move ON-TIME Switch to

1, 5, or 10 minutes

Mode Switch Summary

Flip light switch

off for one second

then back on*

MANUAL MODE

AUTO

TEST

* If you get confused while switching modes, turn the

power off for one minute, then back on. After the cali-

bration time the control will be in the AUTO mode.

Note: When ﬁ rst turned on wait about 1

minutes for

the circuitry to calibrate.

Light Shield

Plastic Hanger

Rubber Plug

Put the ON-TIME switch on the bottom

of the sensor in the TEST position.

Put the ON-TIME switch in the 1, 5,

or 10 minute position.

Manual mode only works at night

because daylight returns the sen-

sor to AUTO.

Flip the light switch off for one sec-

ond then back on to toggle between

AUTO and MANUAL MODE.

Manual mode works only with the

ON-TIME switch in the 1, 5, or 10

position.

This package includes:

Mode: On-Time Works: Day Night

Test

5 Seconds x x

Auto

1, 5, or 10 Min x

Manual

Until Dawn* x

... back on.

1 Second OFF

then...

1 2 3 4 5 6 7 8

Inhaltsverzeichnis

Seite 1 - Halogen Fixture

Seite 2 - INSTALLATION

2598-1311-00INSTALLATIONFor easy installation, select an existing light with a wall switch for replacement.For best performance, mount the ﬁ xture abo

Seite 3 - SPECIFICATIONS

3598-1311-00TEST AND ADJUSTMENT❒ Turn on the circuit breaker and light switch.Avoid aiming the control at:• Objects that change temperature rapidly,

Seite 4 - TECHNICAL SERVICE

4598-1311-00POSSIBLE CAUSE1. The lamp is positioned too close to the sensor or pointed at nearby objects that cause heat to trigger the sensor. (Repo

Seite 5 - Movimiento

5598-1311-001 Bombilla HalógenaDetectorControl de luzRequisitos• El Control de Luz requiere 120 VCA.• Para usar el Modo Manual, conecte el control c

Seite 6 - INSTALACION

6598-1311-00INSTALACIONPara una fácil instalación escoja una luz con un interruptor de pared.Para un mejor funcionamiento, instale el aparato a casi 2

Seite 7 - PRUEBA Y AJUSTE

7598-1311-00SPECIFICATIONSAlcance . . . . . . . . . . . . . Hasta 21 m (varía con la temperatura del medio am-biente).Angulo de detección . . . Hasta

Seite 8 - SERVICIO TÉCNICO

8598-1311-00SINTOMALa luz no se enciende.La luz se prende durante el día.La luz se prende sin ninguna razón aparente.La luz se prende una vez y luego

Kommentare zu diesen Handbüchern

Keine Kommentare

Desa Motion Sensing Halogen Fixture 5525 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Bewegungsmelder Desa Motion Sensing Halogen Fixture 5525 herunter. Desa Motion Sensing Halogen Fixture 5525 User's Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern